CPU	AM3+ Socket: Support for AMD AM3+ FX processors Support for AMD AM3 Phenom™ II processors / AMD Athlon™ II processors (Please refer "CPU Support List" for more information.)
Hyper Transport Bus	5200 MT/s
Chipset	North Bridge: AMD 990FX South Bridge: AMD SB950
Memory	4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory (Note 1) Dual channel memory architecture Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules (Note 2) (Please refer "Memory Support List" for more information.)
Audio	Realtek ALC889 codec High Definition Audio 2/4/5.1/7.1-channel Support for Dolby Home Theater Support for S/PDIF Out
LAN	1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Expansion Slots	2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) (Note 3) 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) 2 x PCI Express x1 slots (All PCI Express slots conform to the PCI Express 2.0 standard.) 1 x PCI slot
Multi-Graphics Technology	Support for 2-Way AMD CrossFireX™ and NVIDIA SLI™ technology (PCIEX16_1, PCIEX16_2)
Storage Interface	South Bridge:  6 x SATA 6Gb/s connectors (SATA3_0~SATA3_5) supporting up to 6 SATA 6Gb/s devices Support for SATA RAID 0, RAID 1, RAID5, RAID 10 and JBOD 2 x Marvell 88SE9172 chips: 2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA 6Gb/s devices Support for RAID 0 and RAID 1
USB	South Bridge: Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers) 2 x Etron EJ168 chips: Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
IEEE 1394	VIA VT6308 chip: Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header)
Internal I/O Connectors	1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 6 x SATA 6Gb/s connectors 1 x CPU fan header 2 x system fan headers 1 x power fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 3 x USB 2.0/1.1 headers 1 x USB 3.0/2.0 header 1 x IEEE 1394a header 1 x Trusted Platform Module (TPM) header 1 x serial port header 1 x clearing CMOS jumper
Back Panel Connectors	1 x PS/2 keyboard/mouse port 1 x optical S/PDIF Out connector 1 x IEEE 1394 port 8 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 2 x eSATA 6Gb/s connector 1 x RJ-45 port 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller	ITE IT8720 chip
H/W Monitoring	System voltage detection CPU/System temperature detection CPU/System/Power fan speed detection CPU overheating warning CPU/System/Power fan fail warning CPU/System fan speed control (Note 4)
BIOS	2 x 32 Mbit flash Use of licensed AWARD BIOS Support for DualBIOS™ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features	Support for @BIOS Support for Q-Flash Support for Xpress BIOS Rescue Support for Download Center Support for Xpress Install Support for Xpress Recovery2 Support for EasyTune (Note 5) Support for Easy Energy Saver Support for Smart Recovery Support for Auto Green Support for ON/OFF Charge Support for Cloud OC Support for 3TB+ Unlock Support for Q-Share
Bundle Software	Norton Internet Security (OEM version)
Operating System	Support for Microsoft Windows 7/ Vista/ XP
Form Factor	ATX Form Factor; 30.5cm x 24.4cm
Note	(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. (Note 2) To support a DDR3 1866 MHz (and above) memory, you must install an AMD AM3+ CPU first. (Note 3) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots. (Note 4) Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. (Note 5) Available functions in EasyTune may differ by motherboard model.

 

Nota:

Aunque se hace un esfuerzo por tratar de mantener actualizadas las imágenes e información técnica de los productos existentes en el sitio, es posible que los productos pudieran no corresponder a las imágenes o haber errores en la información técnica proporcionada. Es por eso que se proporciona el número de parte o código de producto con el cual es posible conocer la fotografía actualizada y descripciones técnicas en la página web de la marca o fabricante.